TRACKED IMPACT CRUSHER
4654i-t
The Lippmann 4654i-t heavy duty build set them up perfectly for the toughest conditions and materials. The 4654i combines the productivity of the 1200mm diameter by 1350mm-wide impactor with the versatility of a full screening and recirculating system, maximizing efficiency through a robust screening and crushing configuration. Both models feature direct drive, an enhanced material flow path, larger double-deck grizzly pre-screen, and an open chassis for ease of access for maintenance and service.
Highlights
On-board jib crane simplifies
blow bar replacement
8.9 yd³ (6.8m³) capacity hopper
Impact chamber with 53” x 48” (1350mm x 1200mm) feed opening
55" (1400mm) main conveyor with adjustable option
12' 3.3" (3743mm) stockpile height
Three-speed track system with smooth start/stop
Standard Features & Options
Standard Features
- 1200mm (48″) diameter x 1350mm (53″) wide Impactor.
- 510Hp (380kW) Volvo D13 Stage V engine/ 516Hp C13 CAT LRC / 536Hp C13 CAT
Stage V - Tracked
- Integrated hydraulic folding hopper.
- Integrated hydraulic folding stockpiling conveyors.
- I-beam plate fabricated chassis construction.
- Open chassis design for ease of maintenance
- Fast setup time
- Vibrating feeder under crusher discharge.
- Refueling pump
Options
- Various blow bar material options
- Main conveyor variable speed control
- Hopper Extensions
- Overband magnet
- Water Pump and dust suppression system
- Work lights
- Belt Scale
Technical Specs
| HOPPER | ||
|---|---|---|
| Hopper Length | 14’ 0.5” (4280mm) | |
| Hopper Width | 8’ 1.8” (2487mm) | |
| Hopper Volume | 8.9 yd³ (6.8m³) | |
| Hopper Material | 8mm sides + 10mm Hardox Liners | |
| FEEDER | ||
|---|---|---|
| Feeder Width | 45.8″ (1164mm) | |
| Feeder Length | 106.2″ (2695mm) | |
| Adjustable Speed | YES – via mechanical flow control | |
| Drive | Hydraulic | |
| SPECIFICATIONS | ||
|---|---|---|
| Impact Rotor | 48” x 53” (1200mm x 1350mm) | |
| Feed Opening | 53.5” x 37” (1360mm x 950mm) | |
| Crusher Drive | Direct Drive | |
| Feed Size | 24” x 20” x 20” (600mm x 500mm x 500mm lump) | |
| CSS Adjustment | Hydraulic Rams, Shim System | |
| Speed Sensor | YES | |
| SCREENBOX | ||
|---|---|---|
| Dimensions – Top Deck | 14′ x 6′ (4287mm x 1830mm) | |
| Dimensions – Bottom Deck | 6′ x 4′ side tension – 3 off | |
| Screens – Top Deck | 6′ x 2′ side tension – 1 off | |
| Screens – Bottom Deck | 6′ x 4′ side tension – 3 off | |
| Screen Angle | 25 deg | |
| Speed Adjustable | YES – Pressure compensated FCV | |
| RETURN CONVEYOR | ||
|---|---|---|
| Belt Width | 26″ (650mm) | |
| Belt Spec | Chevron – 500/3 5+1.5 C15 | |
| Adjustable Speed | YES | |
| CONVEYOR | ||
|---|---|---|
| Stockpile Height | 13′ 8.9″ (4188mm) | |
| Belt Width | 55″ (1400mm) | |
| Angle Adjustable | OPTION | |
| Quick Release | Yes | |
| ENGINE | ||
|---|---|---|
| Engine | Volvo D13 T4F or T3 | |
| Engine Power | 510 hp (380kw) | |
| Fuel Tank Capacity | 228 US gal (864L) | |
| Hydraulic Tank Capacity | 207 US gal (783L) | |
| DIMENSIONS/TOTAL WEIGHT | ||
|---|---|---|
| Transport Length | 62′ 7.2″ (19.079m) | |
| Transport Width | 12′ 3.5″ (3.75m) | |
| Transport Height | 11′ 9.7″ (3.618m) | |
| Operating Length | 62′ 4.4″ (19.009m) | |
| Total Weight | 1.5 deck: 143,267 lbs (64,990kg) 2 decks: 144,908 lbs (65,730kg) | |
Lippmann reserves the right to make changes to the information and design of the machines on this website without reservation and notification to the users. Information at time of publication is considered accurate – Lippmann assumes no liability resulting from errors or omissions in this document.
Diagrams
