INDUSTRY: Recycling • material type: Concrete & Asphalt
Wheeled Jaw Plant Model
The 3062j-w jaw crusher is the only crusher on the market specifically designed extra wide for the recycling industry. It handles slabby concrete, reducing or eliminating the need to prep material. The short stature of the jaw crusher also contributes to the success of this crusher allowing material to easily enter the chamber without causing a tramp event. Another advantage to this plant is the large 62” feeder which allows the recycle material to easily flow into the jaw without any taper.
3062j-w BROCHURE
3062j-w BLOG
https://youtu.be/OWSdYxIFtRw?si=8fNESM_8Slui7e2o 
Our original Jaw, 3062, had lasted us 23 years,” comments Steve Zignego, Fleet & Equipment Manager, Zignego Ready Mix. “The Lippmann crusher has been a very rough, tough machine. You slam the stuff in the hopper, it takes anything we throw at it.”
Steve ZignegoCustomer
Highlights
Large 62” feeder which allows material to easily flow into the jaw without any tapper
An extra heavily ribbed steel frame-stress relieved after welding and before machining
Adjustable tail section
30″ Gape by 62″ wide jaw
with opposing wedge design and one piece steel pitman
Grizzly bypass Optional: Grizzly discharge conveyor
Optional jack legs: (4) hydraulic leveling jacks or (6) run-on jack legs
Oversized tapered roller bearings in both the pitman and frame. Tapered roller bearings exhibit a greater load carrying capacity compared to an equal sized spherical roller used in competitor’s machines
Standard Features & Options
Standard Features
- An extra heavily ribbed steel frame, stress-relieved after welding and before machining
- One-piece steel pitman
- Heat-treated forged alloy steel eccentric shaft
- Steel cheek plates
- Oversized tapered roller bearings in both the pitman and frame
- Reversible manganese steel jaw dies and extensions
- Two heavy-duty flywheels, one grooved for V-belts
- Automatic oil lubrication system, which delivers a metered flow of filtered oil to each bearing
Options
- Hydraulic leveling jacks – (4) 70,000 lb.
- Six (6) run-on jack legs
- NEMA 12-motor control center
- Cross conveyor under grizzly
- Hopper extensions
- Hydraulic toggle
- Tire bulkhead
- An extra heavily ribbed steel frame, stress-relieved after welding and before machining
- One-piece steel pitman
- Heat-treated forged alloy steel eccentric shaft
- Steel cheek plates
- Oversized tapered roller bearings in both the pitman and frame
- Reversible manganese steel jaw dies and extensions
- Two heavy-duty flywheels, one grooved for V-belts
- Automatic oil lubrication system, which delivers a metered flow of filtered oil to each bearing
- Hydraulic leveling jacks – (4) 70,000 lb.
- Six (6) run-on jack legs
- NEMA 12-motor control center
- Cross conveyor under grizzly
- Hopper extensions
- Hydraulic toggle
- Tire bulkhead
Technical Specs
| 3062j-w SPECIFICATIONS | ||
|---|---|---|
| US | ||
| Jaw Crushers | 30″ x 62″ | |
| RPM | 230 rpm | |
| Feed Size | 27″ | |
| Feeder | 62″ x 18′ | |
| Feeder Operating Speed – Max | 830 rpm | |
| Grizzly Length | 4′ | |
| HYDRAULIC TOGGLE CLOSED SIDE SETTING (CSS) | |||
|---|---|---|---|
| INCHES | |||
| 3 | 200-243 | ||
| 3.5 | 280-309 | ||
| 4 | 337-375 | ||
| 4.5 | 399-421 | ||
| 5 | 420-463 | ||
| 8 | *650-717 | ||
| 10 | *799-882 | ||
* Manual toggle plate option only.
See page 2-10 from the Lippmann Jaw manual.
3062 can be set from 3” to 7” (10” with toggle plate).
| HORSEPOWER | ||
|---|---|---|
| HP | KW | |
| Jaw Crusher | 200 | |
| Autolube | 1 | |
| Feeder | 40 | |
| Discharge Conveyor | N/A | |
| TRANSPORTATION | ||
|---|---|---|
| LBS | ||
| Tires | 11R22.5 | |
| Rear Axle | 70,250 | |
| King Pin | 54,250 | |
| Total | 124,500 | |
| Weight of Feeder Module | 36,250 | |
| Total Weight | 160,750 | |
| 3062j-w SPECIFICATIONS | ||
|---|---|---|
| US | ||
| Jaw Crushers | 30″ x 62″ | |
| RPM | 230 rpm | |
| Feed Size | 27″ | |
| Feeder | 62″ x 18′ | |
| Feeder Operating Speed – Max | 830 rpm | |
| Grizzly Length | 4′ | |
| HYDRAULIC TOGGLE CLOSED SIDE SETTING (CSS) | |||
|---|---|---|---|
| INCHES | |||
| 3 | 200-243 | ||
| 3.5 | 280-309 | ||
| 4 | 337-375 | ||
| 4.5 | 399-421 | ||
| 5 | 420-463 | ||
| 8 | *650-717 | ||
| 10 | *799-882 | ||
* Manual toggle plate option only.
See page 2-10 from the Lippmann Jaw manual.
3062 can be set from 3” to 7” (10” with toggle plate).
| HORSEPOWER | ||
|---|---|---|
| HP | KW | |
| Jaw Crusher | 200 | |
| Autolube | 1 | |
| Feeder | 40 | |
| Discharge Conveyor | N/A | |
| TRANSPORTATION | ||
|---|---|---|
| LBS | ||
| Tires | 11R22.5 | |
| Rear Axle | 70,250 | |
| King Pin | 54,250 | |
| Total | 124,500 | |
| Weight of Feeder Module | 36,250 | |
| Total Weight | 160,750 | |
Lippmann reserves the right to make changes to the information and design of the machines on this website without reservation and notification to the users. Information at time of publication is considered accurate – Lippmann assumes no liability resulting from errors or omissions in this document.
Diagrams
3062j-w
