INDUSTRY: Mining, Aggregate, Recycle
material type: Hard Rock, Concrete & Asphalt
Wheeled Jaw crusher
3048j-w
One of the original and most reliable jaws Lippmann has to offer is the 3048j-w jaw crusher. It is ideally sized for easy transport and is set up with the production and reliability needed for the toughest and most demanding of applications. Being the heaviest jaw on the market in this size range makes it unique and ideal for any hard rock applications.
Previous
Next
Highlights
51" (1295mm) x 20' (6.10m) Vibrating grizzly feeder with 5' (1.50m) adjustable grizzly section
20-Ton (18t) hopper constructed of AR steel
Optional: tire bulkheads (not pictured)
30" (762mm) Gape by 48" (1219mm) wide jaw
with opposing wedge design
Grizzly bypass Optional:
Grizzly discharge conveyor
48" (1219mm) Conveyor with CEMA C idlers, premium
belt scraper, and extended with hydraulic fold
belt scraper, and extended with hydraulic fold
Optional jack legs: (4) hydraulic leveling
jacks or (6) run-on jack legs (not pictured)
The Lippmann Edge
Oversized Shaft, Dynamically Balanced Flywheels
All Lippmann heavy-duty jaw crushers feature an oversized, heat treated shaft forged of special alloy to provide an exceptionally large eccentric throw. These heavy-duty shafts are paired with two dynamically balanced flywheels, effectively reducing vibration on both portable and stationary crushers. The overhead eccentric configuration does not rely on gravity alone to move material through the chamber. Rather, the inward and downward movement of the swing jaw provides for a forced-feeding motion to maximize output. All shafts are machined and put through a rigorous inspection process before they enter production.
Tapered Roller Bearing for Optimized Bearing Life
In order to optimize bearing life, only tapered roller bearings are used in Lippmann jaw crushers. The tapered bearings offer a combination of features that spherical bearings are unable to provide. When considering the adjustable clearance, line contact, true rolling motion and ability to carry both radial and thrust loads, the tapered roller bearing is an obvious choice for all jaw crushers. Lippmann proudly stocks a large inventory of all bearing sizes.
Hydraulic Toggle Reduces Setting Time
The automatic hydraulic toggle has greatly reduced the time it takes to change a jaw crusher’s setting. As jaw dies wear, the hydraulic toggle can be easily adjusted to maintain a constant closed side setting (CSS) while in continuous operation. An added benefit of the Lippmann hydraulic toggle package is the ability to provide tramp release once an un-crushable has entered the crushing chamber. In the case of a tramp event, manual or automatic reset of the CSS can be achieved by reducing the feed and closing the jaw on the fly. Nitrogen and Air Bag tensioning systems are available on all mid-sized to large model jaw crushers.
Reversible Jaw Dies for Longer Life
All standard Lippmann jaw dies (stationary and moving) are reversible. They can be flipped from end to end as necessary to get better lifespan out of them. The corrugated design that is centred about the jaw crusher allows this. Lippmann uses a peak to valley arrangement to break the rocks, using shear rather than direct compression.
Oil-Bath Lubrication System
The Lippmann automatic lubrication system (Autolube) can deliver a continuous oil bath to any of the Lippmann jaws. This gravity return system feeds portions of oil to the swing jaw barrel and the frame bearings. There are sight glasses for each return line giving a direct visual of the quality and quantity of oil being delivered. An internal filter removes any contaminants while running. All Autolubes come with an immersion heater for cold environments. Also, there is a low-pressure interlock that can be used in conjunction with an alarm, turn off equipment, etc. Other visual checks that come with the Autolube are operating pressure, external oil level sight glass, and a thermometer for reading the oil temperature.
Taper Lock
The Lippmann Taper-lock package makes lengthy, close-side setting adjustment a thing of the past. This tool-free system allows the operator to add shims to Lippmann manual toggle jaw crushers in a matter of minutes. Increased coverage of the toggle block in extreme applications is an added benefit incorporated in the retrofit design. The taper-lock system is available as a retro-fit to existing crushers and can be installed on new production crushers.
Safety at Every Step
Lippmann prioritizes safety within our equipment design. This includes: engine safety shutdown systems, full safety guarding on all nip points, tagout capability on isolator, startup siren and emergency stops.
Standard Features & Options
Standard Features
- Extra-heavy ribbed steel frame is stress-relieved after welding and before machining
- One-piece steel pitman
- Heat-treated forged alloy steel eccentric shaft
- Oversized tapered roller bearings
- Key components are manganese steel:
- Reversible jaw dies and extension
- Wear places behind the jaw dies
- Cheek plates
- Swing jaw barrel protector
- Bolt-in toggle bearing
- Non-folding short conveyor
- Oil-lubricated
- Two heavy-duty flywheels, one grooved for V-belts
Options
- Extended front discharge conveyor with fold
- Hydraulic leveling jacks – (4) 70,000 lbs (31,752kgs)
- (6) Run-on jack legs
- NEMA 12-motor control center
- Cross conveyor under grizzly
- Tire bulkheads
- Toggle options:
- Hydraulic toggle
- Tapered wedge toggle
- Traditional toggle
Technical Specs
| 3048j-w SPECIFICATIONS | ||
|---|---|---|
| US | METRIC | |
| Jaw Crushers | 30″ x 48″ | 762 x 1219mm |
| RPM | 250 rpm | 250 rpm |
| Stroke | 3/4″ | 19mm |
| Feed Size | 27″ | 686mm |
| Discharge Conveyor | 48″ | 1219mm |
| Discharge Conveyor Operating Speed | 318 ft/m | 97m/m |
| Feeder | 51″ x 20′ | 1295mm x 6.10m |
| Feeder Operating Speed – Max | 830 rpm | 830 rpm |
| Grizzly Length | 5′ | 1.52m |
| CLOSED SIDE SETTING (CSS) | |||
|---|---|---|---|
| INCHES | MM | STPH | MTPH |
| 3 | 76 | 250 | 227 |
| 3.5 | 88 | 288 | 261 |
| 4 | 102 | 345 | 313 |
| 4.5 | 114 | 400 | 363 |
| 5 | 127 | 420 | 381 |
| 6 | 152 | 500 | 454 |
| 7 | 178 | 600 | 544 |
| 8* | 203* | 720 | 653 |
| HORSEPOWER | ||
|---|---|---|
| HP | KW | |
| Jaw Crusher | 200 | 149 |
| Autolube | 1 | 0.75 |
| Feeder | 40 | 30 |
| Discharge Conveyor x2 | 15 | 11 |
| TRANSPORTATION | ||
|---|---|---|
| LBS | KGS | |
| Tires | 315/80R22.5 | 315/80R22.5 |
| Rear Axle | 70,500 | 31,978 |
| King Pin | 51,500 | 23,360 |
| TOTAL | 122,000 | 55,338 |
| Weight of Feeder Module | 32,250 | 14,628 |
| TOTAL WEIGHT | 154,250 | 69,966 |
Lippmann reserves the right to make changes to the information and design of the machines on this website without reservation and notification to the users. Information at time of publication is considered accurate – Lippmann assumes no liability resulting from errors or omissions in this document.
