TRACKED CONE PLANT
400c-te Cone Plant
Electric power on Lippmann’s 400c-te tracked cone crusher provides the savings you are looking for in your operations, from a brand that is renowned for its durability. Sitting on a robust frame, the large 44.5” / 1130mm feed opening of the 400c chamber delivers on high productivity.
Highlights
Hydraulic-folding hopper extensions
Highly productive 400c crushing
chamber with input speeds of 750-850rpm,
and a throw of 3.74”/95mm at discharge
I-beam plate fabricated chassis
construction for unmatched strength
Large gap between crusher discharge
and main conveyor feedboot keep
material moving
Safety comes first with four e-stop
locations around the plant
Choice of 700hp C18 CAT LRC
or 751hp C18 CAT Stage V engine
Adjustable 48” / 1200mm wide
main conveyor offers control over
material flow
10’3” / 3124mm stockpile height
The Lippmann Edge
Overflow Chutes
Removable Feed Cone
Standard Features & Options
Standard Features
- 700Hp C18 CAT LRC engine or 751Hp C18 CAT Stage V
- Tracked mobility
- Integrated hopper with folding rear door
- I-beam plate fabricated chassis construction
- Large gap between crusher discharge and main conveyor feedboot
- Open chassis design for ease of maintenance
- Fast setup time
Safety Features
- External belt alignment points
- External grease points
- Engine safety shutdown systems
- Full safety guarding for nip points
Additional Options
- Hopper extensions
- Various cone liner options
- Work lights
- Long main conveyor
- Hopper spider
- Access hatch
Technical Specs
| FEEDER | |
|---|---|
| Feeder opening width | 910mm (36”) |
| Feeder drum crs. | 6000mm (19’ 8.2”) |
| Drive | Hydraulic |
| Feeder belt width | 1200mm (48”) |
| Motor | Danfoss OMSS 125 |
| Gearbox | Bonfig 809 W2 24.2:1 |
| Flow rate | 128 Lpm (33.8 US gpm) |
| Adjustable speed | Yes |
| Maximum speed | 42 rpm |
| CRUSHER CAVITY SELECTION | |||||||
|---|---|---|---|---|---|---|---|
| Crusher size | Cavity | Minimum Setting “A” 1 | Feed Opening “B” 2 | ||||
| 400c | Medium | 20mm (0.79”) | 198mm (7.8”) | ||||
| Coarse | 25mm (0.98”) | 252mm (9.92”) | |||||
| Extra coarse | 30mm (1.18”) | 299mm (11.77”) | |||||
| MAIN CONVEYOR | |
|---|---|
| Stockpile height | 3124mm (10’-3”) |
| Belt width | 1200mm (48”) |
| Belt spec | Plain 500/3 8+2 |
| Drive drum dia. | 350mm (13.7”) |
| Tail drum dia. | 270mm (10.6”) |
| Motor | 2 x 11Kw Motors |
| Flow rate | 89.6 Lpm (23.7 US gpm) |
| Maximum speed | 112 rpm |
| Angle adjustable | Yes |
| Quick release | Yes |
| POWERUNIT AND HYDRAULICS | |
|---|---|
| Engine | 700Hp C18 CAT LRC engine or 751Hp C18 CAT Stage V |
| Engine speed | 1500 rpm – 50Hz, 1800 rpm – 60Hz |
| Generator | WEG 550Kva |
| Motor (auxiliary/lube/clamp/track) | 55kw WEG Motor, 90kw when tracking |
| Pump (auxiliary/lube/clamp/track) | 140cc Rexroth |
| Total system flow (max) | 266 Lpm (70.1 US Gpm) |
| Hydraulic tank capacity | 280 L (73 US Gals) |
| DIMENSIONS AND WEIGHTS | |
|---|---|
| Length – transport all models | 16.76m (55′ – 0″) |
| Width – transport all models | 3.66m (12′) |
| Height – transport track | 3.6m (11′ – 9.7″) |
| Weight – track | 56,000 Kgs. (est.) |
Lippmann reserves the right to make changes to the information and design of the machines on this website without reservation and notification to the users. Information at time of publication is considered accurate – Lippmann assumes no liability resulting from errors or omissions in this document.
Diagrams
Operation
Transportation
