CLOSED-CIRCUIT WHEELED CONE PLANT
300R Closed-Circuit Cone Plant
COMING SOON, the NEW 300R wheeled cone plant boasts a highly productive 44” cone and unbeatable versatility thanks to the complete closed-circuit screening and recirculating system. The crusher’s high material capacity and throughput, along with large stockpile capacity, allow operators to produce a high-quality crushed and screened final product with a single machine.
Highlights
5’ x 20’ (1524 x 6100mm) 3-deck incline screen
370 ft3 (10m3) hopper/feeder capacity and variable speed feeder
Patent-pending automatic metal-detecting dump chute removes metal objects for cone feed
Top two decks feed cone or top deck feeds cone and mid deck to chute on cone feed conveyor side
300 hp electric driven cone crusher
Flop gate and lined chute to pull material from mid-deck as specified product
The Lippmann Edge
Cutting Edge Design - Metal Detecting Dump Chute
Patent-pending automatic metal-detecting dump chute removes metal objects for cone feed
Unbeatable Versatility with a Closed-Circuit System
The complete closed-circuit screening and recirculating system gives you unmatched versatility in cone crushing.
The closed-circuit system features a 3-deck including screen where the top two decks feed cone or top deck feeds cone and mid deck to chute on cone feed conveyor side.
The flop gate and lined chute to pull material from mid-deck as specified product.
Highly Productive Cone
Standard Features
Standard Features
- 300 hp electric driven cone crusher
- 5’ x 20’ (1524 x 6100mm) 3-deck incline screen
- 370 ft3 (10m3) hopper/feeder capacity
- Variable speed feeder
- Top two decks feed cone or top deck feeds cone and mid deck to chute on cone feed conveyor side
- Lockable – 8hp electric start Honda powered hydraulic power pack
- Individual wheel fenders
- 2x manually lowered front support legs
- 4x hydraulic run-on jack legs
- 2x drop down crib legs
- Overflow chute
- Storage for cone feed chute for transport
- Patent-pending automatic metal-detecting dump chute removes metal objects for cone feed
- Flop gate and lined chute to pull material from mid-deck as specified product
Technical Specs
| CRUSHING CHAMBER | ||||||
|---|---|---|---|---|---|---|
| US | METRIC | |||||
| Maximum Feed Opening | 9.17” | 233mm | ||||
| Crusher Drive | 2x Banded V-Belts | 2x Banded V-Belts | ||||
| Min. Closed-Side Setting | 0.50” | 13mm | ||||
| Max. Closed-Side Setting | 1.75” | 45mm | ||||
| Closed-Side Setting Adjustment | Hydraulic | Hydraulic | ||||
| Chamber Level Sensor | YES | YES | ||||
| HOPPER | ||
|---|---|---|
| US | METRIC | |
| Hopper Length | 190” | 4826mm |
| Hopper Width | 82” | 2083mm |
| Hopper Volume | 370 ft3 | 10m3 |
| REAR DISCHARGE CONVEYOR | ||
|---|---|---|
| US | METRIC | |
| Stockpile Height | 12’ 1” | 3.68m |
| Width | 48” | 1219mm |
| Length | 89” | 2261mm |
| Speed | 380 ft/m | 116m/m |
| Angle Adjustment | YES | YES |
| FEED CONVEYOR | ||
|---|---|---|
| US | METRIC | |
| Width | 47” | 1194mm |
| Length | 174” | 4420mm |
| Speed | 64 f/m | 19.5m/m |
| Drive | Hydraulic – Gearbox Reducer | Hydraulic – Gearbox Reducer |
| POWER | ||
|---|---|---|
| US | METRIC | |
| Panel | Wired to terminal box w. opt NEMA-12 motor control center | Wired to terminal box w. opt NEMA-12 motor control center |
| Voltage | 460V & 575V | 460V & 575V |
| Hydraulic Tank Capacity | 84.5 US gal | 320L |
| TOTAL WEIGHT | ||
|---|---|---|
| US | METRIC | |
| Total Weight | 138,200 lbs | 62,686kg |
Lippmann reserves the right to make changes to the information and design of the machines on this website without reservation and notification to the users. Information at time of publication is considered accurate – Lippmann assumes no liability resulting from errors or omissions in this document.
